| Model range |
MDH 3, 3.5 kW, 230 V, 15 A
MDH 4, 4.4 kW, 230 V, 19 A
MDH 6, 5.7 kW, 230 V, 25 A
MDH 7, 6.5 kW, 400 V, 2 x 16 A
|
|
 |
|
|
|
|
MDH 3..7
(closed outlet design)
Electric mini instantaneous water heater with highly-efficient bare-wire heating system for supplying hot water to a single point of use, i.e. one handwash basin or sink. The attractive small appliance perfectly matches all wash basins and heats the water automatically as it flows through it, without wasting energy in standby operation. The economically set flow rate ensures maximum efficiency. The heater can easily be installed directly to a standard mixing tap, our special jet regulators guarantee efficient and economical flow results.
Description
 |
Mini-sized electric instantaneous water heater, operates automatically by the water flow |
|
Water outlet via existing tap or mixer, CLAGE taps and accessories recommended |
|
Effective bare-wire heating system for very quick response |
|
Flow adjustment control, preset for a temperature increase of 25 K |
|
No standby heat losses |
|
Double pole thermal cut-out protection |
|
Inlet/outlet water connection 3/8" |
|
Mains power cable approx. 65 cm long
MDH 3 with European standard plug |
Applications
|
Handwash basins, e.g. in toilet rooms, bathrooms, bedrooms, restaurants and office buildings |
|
Kitchen sinks (only highest power rating recommended, depending on local supply temperature) |
Useful:
Installation is a simple matter with the connection set (T-piece and flexible pressure hose) included
|
|
;)
;ChangeBild('/produkte/Produktbilder/MHD/MDH_200_2.jpg')){kind=link}