| Model range |
S 15-U 2.2 kW - 230V
S 15-O 2.2 kW - 230V
|
|
 |
|
|
|
|
S 15
(15 l storage water heater)
Small electric water storage heater with pressure-type internal tank of corrosion-proof copper for supplying hot water between approx. 35 °C and 80 °C to one point of use. The appliance can be installed either as a vented unit in combination with an open-outlet fitting or as an unvented unit in combination with a corresponding relief valve. The water in the storage heater is automatically maintained at the temperature preset at the push of a button by a controller. An additional single heating cycle can be started separately if necessary.
Description
 |
Small electric water storage heater with 15 litres capacity, unvented design |
|
For under-table (S15-U) or above-table (S15-O) installation |
|
Corrosion-proof internal copper tank with recyclable CFC-free thermal insulation |
|
Touch key for temperature selection 40 55 70 °C with heating indicator |
|
Additional button for heating once to 90 °C |
|
Frost protection |
|
Power cable approx. 65 cm long, with standard European plug |
Unique
Easy-care touch key for tempera-ture selection with LED and additional button for heating once to 90 °C. If the appliance is rarely used, the contents of the storage heater can be heated up once to produce roughly 30 litres hot water before the appliance switches to standby mode and continues operation as previously set (e.g. at 40 °C), thus considerably reducing the energy consumption in standby mode.
Use
|
Single or double points of use, such as kitchen sinks, drains, commercial wash rooms |
Accessories
SNO (Art. No. 40110)
Two-hand wall-mounted mixer with combination valve and 16 cm tubular spout |
|
;)
;ChangeBild('/produkte/Produktbilder/S10/S15O_200_2.jpg')){kind=link}