| Model range |
MDX 3, 3.5 kW, 230 V, 15 A
MDX 4, 4.4 kW, 230 V, 19 A
MDX 6, 5.7 kW, 230 V, 25 A
MDX 6-220, 6.0 kW, 220 V, 27.3 A
MDX 7, 6.5 kW, 400 V, 2 x 16 A
|
|
 |
|
|
|
|
MDX 3..7
(electronic, closed outlet design)
Small electronic instantaneous water heater with highly-efficient bare-wire heating system for economic water supply to e.g. a handwash basin or a sink. The shapely small appliance heats the water automatically as it flows through it, without wasting energy in standby operation. The heating power is electronically controlled in order to ensure that the outlet temperature won't be exceeded (factory setting
ca. 38°C). In combination with the economical flow rate the
appliance ensures maximum energy efficiency.
Description
 |
Mini-sized electronic instantaneous
water heater operates automatically
by the flow |
|
Heating power controlled electronically
for temperature stabilisation |
|
Outlet temperature can be preset inside
the unit between about 30°C and 50°C (factory setting 38°C) |
|
Flow adjustment control, preset for
a temperature increase of 25 K |
|
Effective bare-wire heating system IES
for very quick response |
|
Double pole thermal cut-out protection |
|
Special jet regulator for use with screw threads M22/M24 included |
|
Connecting set to angle valve included
(T-piece and flexible pressure hose),
except for type MDX 6-220 |
|
Mains power cable approx. 65 cm long |
|
Inlet/outlet water connection 3/8" |
Use
With standard taps for handwash basins
and sinks
• also if low flow water pressure at
installation site
• also suitable for reheating water e.g. in
connection with solar heating systems
• also usable with a pillar mixer
(without mixture of hot and cold water)
|
|
;)
;ChangeBild('/produkte/Produktbilder/MDX/MDX-200.jpg')){kind=link}