Please note: This product is no longer available!
If you have any questions, please contact our After-Sales Service or visit our online spare parts shop. Please have the device type, serial number and, if available, your CLAGE customer number ready.
Visit our online spare parts shop here.
- Electronically controlled instantaneous water heater (under-sink unit) in mini format for supplying a wash basin
- Power electronics to control the heating power for demand-oriented temperature limitation
- Outlet temperature and flow rate can be preset in the unit (factory setting approx. 38 °C)
- Effective and maintenance-friendly bare-wire heating system IES® with replaceable heating cartridge
- Pressure-resistant design
- Special jet controller with flow regulator for use in M22 / M24 aerator thread and connection set (T-piece and flexible pressure hose) for an angle valve included in delivery
- Nominal power ratings:
- MDX 3: 3.5 kW 230 V (approx. 2.0 l /min, 38 °C*) with Schuko plug
- MDX 4: 4.4 kW 230 V (approx. 2.5 l /min, 38 °C*) Fixed connection
- MDX 6: 5.7 kW 230 V (approx. 3.3 l /min, 38 °C*) Permanent connection
- MDX 7: 6.5 kW 400 V (approx. 3.7 l /min, 38 °C*) Permanent connection
- Inlet temperature = 13 °C
- Dimensions (H × W × D): 13 × 18,5 × 8 cm
- Energy efficiency class A (this figure corresponds to the requirements for EU Regulation No. 812/2013, which will become binding from September 2015.
Data. Values. Facts.
Operating and installation instructions
|Operating and installation instructions||MDX-GMA-de-en-fr-nl.pdf||16.03.2012||